Skip to content

Mold Inspecting

builder and inspector looking at new property

Once you begin noticing signs and symptoms of mold exposure, the services of a mold removal service company must be contracted to carry out necessary inspection procedures. Minneapolis Mold removal service company ensures that it carries out proper inspection processes to ascertain the type of mold formed and take necessary removal measures. We also understand that mold exposures have different implications and effects on the individual being exposed. And a proper inspection of the building or facility where mold growth occurs needs to be carried out before any further remedial steps can be carried out. The following are characteristics of standard inspection procedures.

Visual inspection

This is carried out by physically walking through the facility or building, taking notice of areas that could be prone to mold growth. The building's internal and external areas are well observed by inspection officers who record all they see about the structure. This would give an idea of the kind of mold that could be growing therein. The subfloors, air conditioning systems, and other parts of the building with reduced temperatures increased relative humidity, and moisture presence is also observed during this process. We don't also fail to include looking out for signs of water intrusion or damage, characteristic odors.

Moisture check

This involves the observations targeted at identifying the level of moisture present in areas or parts of the building. This check is done on both building material surfaces or internal components of the building. As a means of coming up with qualitative results, infrared cameras and moisture meters are deployed. This ensures that locations, where there are potential elevated moisture and sources of moisture, are identified. This thorough check makes sure that all potential points where molds can grow are identified and taken into account.

Measurement of air quality parameters

Parameters like temperature, relative humidity, airborne particle mass must be properly taken into account. This would give an idea of the specific location, size, and hazard rate the molds have begun effecting. Molds need low-temperature areas, so carrying out temperature measurements would help analyze the severity or proneness of the environment to mold growth. Some offices or facilities have naturally occurring low temperatures as a result of probably the kind of activity done or the climate conditions present. These measurements are, therefore, mandatory to be carried out while inspecting.

Collection of mold samples

Sometimes in the course of inspections, formations, or growths might be noticed that need proper and careful analysis before confirming that they are mold growth. These samples need to be collected and sent to the laboratory for proper tests to be carried out. A laboratory analysis, various sampling and analytical methods are applied to generate answers to the assumptions that arose during inspection. In some cases, the specie of mold needs to be properly identified. This identification may not be done through physical observation at first sight but requires laboratory analysis. At the end of the entire inspection process, results, observations are properly documented.

NEW Free Quote - Purple